Twister B4 Bucking Machine
Press and move to zoom.
Mouse over image to zoom.

Twister B4 Bucking Machine

Product Code: 186341

Bucking cannabis on a large scale sucks. But it doesn’t have to. The Twister B4 ‘Bucker’ raises the bar on single piece flow by adding advanced, patent-pending cannabis bucking technology to your process flow, replacing the work that crews of 5-7 used to do by hand. Process up to 150+ lbs/hr (fully hydrated) with one unit!

The B4 ‘Bucker’ is designed to deliver non-stop performance under the most demanding conditions known to commercial cannabis. An industry first, the B4 ‘Bucker’ uses an “Active Gearing” system that allows the B4 to process stems up to 3/4” in diameter at speed rates of 150+ lbs/hr--no jams!

Features
  • 150+ lbs/hr throughput (speeds of up to 30 ft/sec)
  • Quick and easy changeouts with removable cartridges
  • Patent-pending “Active Gearing” drivetrain reduces jams and downtime
  • Washdown Rated (Watertight) / IP69K and IP66K. Pressure washable
  • SafeFeed™ adaptor on the entry holes prevents injury
  • Emergency stop. Clear and within reach
  • Easy to use. Ergonomically designed. Easy to load and operate
  • Easy to clean. Breaks down in less than 2 minutes. Easy access to components
  • Minimal training required. Manuals, videos, and tips available on the website
  • Buck dry or fully hydrated
Specifications
  • Input Voltage: 120V, 60 Hz Single Phase
  • Current Draw: < 2A Operating.14.8A Max
  • Drive Motor: 1HP, IP66/IP69K Washdown
  • Motor RPM: 1750 RPM
  • Roller Sets: Neoprene Rubber
  • Total Weight: 196lbs /89kg
  • Cartridge Weight: 57lbs / 26kg
  • Unit Length: 37.5in / 96cm
  • Unit Width: 13in / 33cm
  • Unit Height: 14.5in / 37cm
  • Circuit Breaker Required: 20A / 120V
  • Connector (plug): NEMA 5-15P
  • Fused: Yes, Thermally

PLEASE CONTACT YOUR SALES REPRESENTATIVE TO ORDER THIS PRODUCT

 Spec Sheet

 Operation Manual

 Cleaning Instructions

NEED ASSISTANCE?
MSRP: $23,627.00