EWCO 300 Hypochlorous Acid Generator Flow System

More detail about EWCO 300 Hypochlorous Acid Generator Flow System

Why should you choose onsite generation?

Athena Cleanse= $70/gallon

Hypo 7.5= $0.20/gallon

One gallon of bottled hypochlorous acid (such as Athena Cleanse or Clear Line) will cost anywhere from $70 to $150 USD. With the Hypo 7.5 machine, you can make 2 gallons of 500 ppm* hypochlorous for $0.40 USD--and that includes the amortized cost of the machine, which comes with a 5-year or 2,000 hour warranty.

The Hypo 7.5 can make 2 gallons of hypochlorous (200, 500, or 1,000 ppm) in as little as 8 minutes. All you have to do is add water and a few spoons of salt and vinegar. The Hypo is made in the USA and we offer free product support.

With onsite generation, you have complete control over the quantity and strength of your hypochlorous. Make as much as you want, whenever you need it, at an extremely low cost.

*For reference, Current Culture's Clear Line is 1500 ppm and Athena Cleanse is 280 ppm.

Hypochlorous acid is a non-toxic multipurpose solution for all aspects of a hydroponic system. It is the most effective form of chlorine and has a neutral pH, low TDS, and is organic-approved by the USDA. Hypochlorous is the active ingredient in popular brands such as Athena Cleanse, Current Culture's Clear Line and UC Roots, and Plant Aid.

What can hypochlorous acid do?

-Root zone optimizer

-Pre-germination seed soak

-Equipment sanitation

-Biofilm eliminator

-Descaler

-Antifungal + sporicidal

-Produce rinse

-Cuttings dip

-Growing media cleanser

-Algae inhibitor

Dosage

Hypochlorous acid can be added directly to water systems, (R) deep water culture tanks, flood tables, hydro-buckets, and misters. Free available chlorine levels should not exceed 5 ppm at the plant root.

-Descaling: 5 ppm in a recirculating system or 500 ppm for flush to waste

-Root zone optimization: 2-4 ppm in a recirculating system

-Equipment sanitation: 200 ppm dip or soak 

-Growing media: 200 ppm soak (>10 minutes), then rinse with water

-Cuttings: 10 ppm dip

-Seed sanitizer: 2 ppm soak

-Produce wash: 50-100 ppm (dependent on type of produce)

Technical

Model:   EWCO 300 System

Electrolysis Type:   Single Cell, Single Stream, Non-membrane Electrolysis

Power Supply:   110V/220V, 50/60Hz

Build Material: Polished 316 Marine Grade Stainless Steel

Dimensions:  W 26.2 cm x H 41.8 cm x L 17 cm

Weight:   11.8 kg

Solution:   Hypochlorous Acid (HOCl)

Concentration:   10 to 300 ppm

pH:  Acidic to Neutral (pH5-pH8) - adjustable by additive & system settings

Oxidation-Reduction Potential (ORP):  800 mV to 1100 mV

Production Rates

Using Normal Salt Water Additive

Rate @200ppm: 1.5 L/minute

Rate @150 ppm: 2 L/minute

Rate @100 ppm: 3 L/minute

Rate @75 ppm: 4 L/minute

Rate @60 ppm: 5 L/minute

Rate @50 ppm: 6 L/minute

Using Acidified Salt Water Additive (HCl added)

Rate @300ppm: 1.5 L/minute

Rate @225 ppm: 2 L/minute (0.53 gal./minute)

Rate @150 ppm: 3 L/minute (0.8 gal./minute)

Rate @112 ppm: 4 L/minute (1 gal./minute)

Rate @90 ppm: 5 L/minute (1.3 gal./minute)

Rate @75 ppm: 6 L/minute (1.5 gal./minute)

Included in kit

EWCO 300 System

Salt Brine Additive Tank (4 liter tank)

Mounting Brackets (2) for EWCO 300 System and Additive Tank

Plumbing fittings and hoses for installation (see manual)

Chlorine Test Paper

pH Test Paper