Twister UltraClean

FEATURES

• 125G / 470L tank capacity
• 4KW Ultrasonic Power @ 28KHz
• Lift mechanism to lower and raise equipment from the tank, Powered lift, 100kg capacity
• 7” Siemens touch screen panel
• Full circulation and filtration system, with oil skimmer
• 304 Stainless Steel interior and exterior shell
• 2x 304 Stainless Steel cleaning baskets
• Locking casters for easy mobility
• 50 micron filter
• Automated filter change warning
• Only one operator required
• Clean 1 Trimmer in 15 minutes
• Built-in timer for bath cycle countdown
• Programmable Agitation
• Temperature control up to 65°C
• Non-caustic UltraClean Solution by Twister

Intensive Cleaning

Trimming machines have enabled producers to trim faster with fewer people required. But cleaning has always been a time-consuming process. It takes physical effort to do a quality cleaning job that meets the QA department’s standards and requirements. Not anymore! The UltraClean allows producers to increase efficiency by a One-Touch Deep Clean. With only one personnel required, the fully automated Siemens touch screen panel does the work for you, including an Automated Lift to help lower and raise the equipment safely out of the tank and self-filtering the organic residue during cycles.

QA Approved

Consumer health and safety is a top priority in any commercial facility and the equipment used for processing the equipment is quality assured to meet the standards. This level of sanitation and cleaning is not only difficult for a person but often inconsistent between employees. The ultrasonic technology gets the toughest buildup in hard to reach places by creating microscopic bubbles that dislodge buildup from the surface of the equipment. The added up and down agitation feature increases turbulence and improves the cleaning efficiency: the high heat and Twister UltraClean Solution aids in breaking down stubborn buildup. The UltraClean uses a physical technique, so you don’t have to use harsh, corrosive chemicals that may erode your equipment or cause a health concern.

Commercial Clean in One-Touch

Cleaning to a commercial standard can take hours and, in many cases, in professional facilities, can easily end up taking up half of the day. The amount you are harvesting, in addition to the number of cultivar changes, will drastically increase the time spent cleaning, which means less time processing.

The Twister UltraClean cleans one trimmer in 15 minutes* versus 120 mins by hand! Even better, that fifteen minutes is a fully automated self-clean with the Siemens one touch panel. Now you can set the timer and go tackle another task in between cycles.

BATH CYCLE RECOMMENDED LENGTHS

• Low Buildup/Soil - One – 15 minute cycle with quick wipe down or hose
• Medium Buildup/Soil - Two – 15 minute cycles with a quick wipe down or hose after each cycle
• Heavy Buildup/Soil Two to Four – 30 minute cycles with a wipe down after each cycle and final pressure wash is required

WHAT FITS

1 Full Twister T4 Trimmer

The entire T4 device can fit. We recommend removing the tumbler and shroud and placing them beside the trimmer, and flipping up the bedknife, for improved cleaning.

4 T2 Tumblers, Brushes & Shrouds at Once!

The removable components along with the Trim Saver can go into the UltraSonic tank. A custom T2 rack system holds 4 sets of T2 parts (tumblers, brushes, shrouds) or can be broken down into systems as shown below.

The UltraClean is built to fit Twister T2 & T4 products but can also be used for additional products*

1. Metals
2. Plastics
3. Glass

We do not recommend for use with products manufactured with mild steel as there is opportunity for corrosion. In the event of use with mild steel, the product should be removed and dried immediately to prevent corrosion.

*Keirton Inc. does not accept liability for damages to any products manufactured by anyone other than Keirton Inc. It is the sole responsibility of the operator to ensure any products that are not manufactured by Keirton Inc. are acceptable for use in the UltraClean.